Lets the MoTeC ECU automatically upshift and downshift while the Nissan R35 GT-R is in manual mode.

Install

• One end is unterminated and connects at the white OEM paddle shifter connector (left of the brake pedal on LHD cars, behind the glove box on RHD cars)
• Under the connector cover, splice the red harness wire to pin 22 (white) and the black harness wire to pin 25 (blue)
• On the MoTeC end, the black wire goes into A8 and the red wire into A9
• Each end is labeled with its wiring and pin instructions

Construction

• TXL wire with XLPE insulation: heat, flame, gasoline, grease and acid resistant, rated from -40°F to 257°F